德国巴斯夫PA66(全球)尼龙是*重要尼龙,是聚酰胺纤维（锦纶）是一种说法. 可制成长纤或短纤，工程塑料，产量在五大通用工程塑料中居首位。   。 

德国巴斯夫PA66(全球)性能指标: 

外观 微黄色均匀颗粒             相对密度 1.30～1.40              含湿量(%) ≤1.5             

拉伸强度(MPa) ≥150              静弯曲强度(MPa) ≥220         弯曲弹性模量(MPa) ≥6.5×103             

缺口冲击强度(KJ/m2) ≥15   热变形温度(1.81MPa，℃) ≥210          玻璃纤维含量(%) 30±2  

德国巴斯夫PA66(全球)用途 它适合制作凸轮、伐座、收音机零部件、电子仪表零件、汽车交通零部件等 

      本产品居于高强度、高耐热性、热胀系数和收缩率小，吸水性低，尺寸稳定性随大气湿度和温度变化而不大，。

Ultramid A3EG3 is a 15% glass fiber reinforced injection molding PA66 grade.

Ultramid A3EG6 is a 30% glass fiber reinforced injection molding PA66 grade.

Ultramid A3EG7 is a 35% glass fiber reinforced injection molding PA66 grade.

Ultramid A3HG2 is a 10% glass fiber reinforced injection molding PA66 grade.

Ultramid A3HG5 is a 25% glass fiber reinforced injection molding PA66 grade. 

Ultramid A3HG7 is a 35% glass fiber reinforced injection molding PA66 grade.

Ultramid A3K is an easy flowing, pigmented black, injection molding grade PA66.

Ultramid A3W Easy flowing, heat aging resistant injection moulding grade for fast processing.

Ultramid A3WG6 is a 30% glass fiber reinforced and heat resistance injection molding PA66 grade.

Ultramid A3WG7 is a 35% glass fiber reinforced and heat resistance injection molding PA66 grade.

Ultramid A3X2G5 Glass fibre reinforced injection moulding grade with improved flame retardance

Ultramid A3Z Impact-modified and stabilized injection moulding grade for components 

Ultramid A4H High heat aging resistant, medium viscosity injection moulding grade